Epson/Axiohm Commands; Emulation Modes - Ithaca PcOS Series 80PLUS Programmer's Manual

Programmer's Guide
Chapter 8:

Epson/Axiohm Commands

Emulation Modes

The Series 80PLUS thermal printer is capable of emulating an Epson TM-T8x series printer and
Axiohm 7193 printer as well as its Ithaca modes. Though the Epson TM-8x and Axiohm 7193 share
many of the same commands, they do not all produce the same results. Therefore, to ensure complete
compatibility, the Series 80PLUS must be configured specifically for either Epson TM-T8x emulation
or Axiohm 7193 emulation. The current emulation mode can be obtained at any time by performing a
self-test and may be changed at any time via the Configuration Mode.
Command Name
Command Name is the name of the command.
Origin specifies which printer command set the command comes from.
Origin may take on any combination of the following values:
E = Epson TM-T8x command set
A = Axiohm 7193 command set
I = Series 80PLUS command extension
* = Command has different functions depending upon the current emulation mode
PcOS Series 80PLUS
Rev B 4/13/99
Epson Commands
Emulation Modes
[ Origin ]
Page 59