Command Descriptions; Print And Feed Commands - Ithaca PcOS Series 80PLUS Programmer's Manual

Epson Commands

Command Descriptions

Command Descriptions

Print and Feed Commands

Function
ASCII
Hexadecimal
Decimal
Description
Function
ASCII
Hexadecimal
Decimal
Description
Function
ASCII
Hexadecimal
Decimal
Default
[Epson TM-T8x]
[Axiohm 7193]
Description
Function
ASCII
Hexadecimal
Decimal
Range
Description
Page 64
PcOS Series 80PLUS
Print and line feed
LF
0AH
<10>
This command prints the data in the print buffer and feeds one line based
on the current line spacing.
Print
ETB
17H
<23>
This command prints one line from the buffer and feeds paper one line at
the current line height (functions same as a LF command).
Print and carriage return
CR
0DH
<13>
CR is ignored.
This command functions the same as LF.
The table below describes the operation of the LF command based upon its
default setting in configuration mode.
Paper Automatic line feed
enabled
Paper roll Functions same as LF
Print and feed paper
ESC J
1BH 4AH
<27> <74>
0 ≤ n ≤ 255
This command prints the data in the print buffer and feeds the paper [n ×
vertical motion unit]. When standard mode is selected, the vertical motion
unit set by GS P is used. When page mode is selected, the vertical or
horizontal motion unit set by GS P is used for the print direction set by
ESC T.
Rev B 4/13/99
Programmer's Guide
Automatic line feed
n
n
n
[EA]
[A]
[EA]
disabled
Ignored
[EA]