Connecting The Cables; Figure 2-14 Attaching Cables To The Cable Management Arm - Sun Microsystems Sun Fire V210 Installation Manual

Caution – Leave enough slack in the cable to allow for articulation of the cable
management arm and extension of the slide assemblies.
Attach cable using straps
provided
Attaching Cables to the Cable Management Arm
FIGURE 2-14
20. Use the screw at the end of the cable management arm to adjust the angle of the
arm when it is fixed in the rack.

Connecting the Cables

This section shows the location of the I/O ports on the back of the servers.
Leave enough slack cable to
allow for arm movement
Chapter 2 Installing the Hardware 21