Ethernet Ports; Serial Ports; Table 2-1 Ethernet Connection Transfer Rates; Table 2-2 Default Serial Connection Settings - Sun Microsystems Sun Fire V210 Installation Manual

Ethernet Ports

The Sun Fire V210 and V240 servers each have four autonegotiating
10/100/1000Base-T Ethernet system domain ports. All the Ethernet ports use a
standard RJ-45 connector, the transfer rates for which are given in
Ethernet Connection Transfer Rates
TABLE 2-1
Connection Type
Ethernet
Fast Ethernet
Gigabit Ethernet
In addition, each server has one 10Base-T Ethernet management domain interface,
labelled NET MGT. For information on configuring this port for managing the server
with ALOM, see the ALOM Online Help which is included on the Sun Fire V210 and
V240 Server Documentation CD.

Serial Ports

The server has two serial ports, labelled SERIAL MGT and 10101.
The SERIAL MGT port accepts an RJ-45 connector. Use this port only for server
management.
The port labelled 10101 accepts a DB-9 connector. Use this port for general purpose
serial data transfer.
The default serial connection settings are listed in
Default Serial Connection Settings
TABLE 2-2
Parameter
Connector
Rate
Parity
Stop bits
Data bits
IEEE Terminology
10Base-T
100Base-TX
1000Base-T
Setting
SERIAL MGT or 10101
9600 baud
None
1
8
TABLE 2-1
Transfer Rate
10 Mbit/s
100 Mbits/s
1000 Mbit/s
.
TABLE 2-2
Chapter 2 Installing the Hardware
.
23