Figure 2-7 Tightening The Front Screws - Sun Microsystems Sun Fire V210 Installation Manual
Hide thumbs
Also See for Sun Fire V210:
- Administration manual (114 pages) ,
- Manual (102 pages) ,
- Service manual (62 pages)
Table of Contents
Advertisement
7. With the spacer tool still in place and the slide assemblies vertical, fully tighten
the screws at the front of the rack.
FIGURE 2-7
8. Remove the spacer tool.
9. Extend both slide assemblies to reveal the slot towards the back of each.
16
Sun Fire V210 and V240 Servers Installation Guide • April 2003
Tightening the Front Screws
Advertisement
Table of Contents
