Connecting Power Cables To The Sun Fire E6900 System; Figure 2-5 Rts Ac Power Switch On The Sun Fire E6900 System - Sun Microsystems Fire E6900 Installation Manual

2.3 Connecting Power Cables to the Sun Fire
E6900 System
1. Turn off each redundant transfer switch (RTS) on both the front and rear of the
system (
FIGURE 2-5
2. Remove the power cables from the shipping carton.
3. Remove the socket covers on each RTS module.
4. Release the catches and remove the kick-panel.
The kick-panel snaps off.
5. Release the catches and extend the anti-tilt bar at the front of the system.
2-8 Sun Fire E6900/E4900 Systems Installation Guide • February 2004
).
FIGURE 2-5
RTS AC Power Switch on the Sun Fire E6900 System