Figure 2-13 Attaching The Cable Management Arm - Sun Microsystems Sun Fire V210 Installation Manual

Caution – When you operate the triggers to slide the server into and out of the
rack, move your fingers away from the trigger area once the server is released. There
is a pinch risk if you do not.
17. Clip the cable management arm to the slide assembly.
There are clips at each end of the cable management arm which attach to the slide
assemblies. See
FIGURE 2-13
18. Thread the velcro straps through the holes in the cable management arm.
19. Secure the cables along the length of the cable management arm using the velcro
straps.
20 Sun Fire V210 and V240 Servers Installation Guide • April 2003
.
FIGURE 2-13
Attaching the Cable Management Arm