Connecting The Cables - Sun Microsystems Netra t1 100 User And Administration Manual

6
C H A P T E R

Connecting the Cables

This chapter tells you how to connect the power cables and the Ethernet and serial
cables to the Netra t1 system. It also tells you how to set up the serial connections
you need.
Make sure you have installed the Netra t1 system into a rack or cabinet (see
Chapter 5) before following the instructions in this chapter.
The chapter contains the following sections:
"Connecting the Cables to the Netra t1" on page 48
"Connecting the Power Cord(s)" on page 50
"Setting up Serial Connections" on page 52
What's Next?
When you have followed the instructions in this chapter telling you how to connect
up the cables and set up serial connections to the Netra t1, you are ready to power
up the system. For information about powering up the system, see Chapter 7.
47