Power inlet
FIGURE 2-15
FIGURE 2-16
Power
The Sun Fire V210 server has a single AC inlet on the back of the server. The Sun
Fire V240 server has two inlets, one for each power supply unit. The operating range
is shown in
server is in Standby power mode. The only way to turn the server fully off is to
remove the server from the power source by unplugging the power cable.
22
Sun Fire V210 and V240 Servers Installation Guide • April 2003
NET MGT
Sun Fire V210 Server Back Panel
Power inlets
NET MGT
Sun Fire V240 Server Back Panel
. As long as the server is connected to a power source, the
TABLE 2-10
10101
SERIAL
Ethernet
MGT
10101
SERIAL
Ethernet
MGT
USB
SCSI
USB
SCSI