Installation Overview; Table 1-3 Contents Of The Sun Fire V210 And V240 Servers Ship Kit - Sun Microsystems Sun Fire V210 Installation Manual

TABLE 1-3
Description
Sun Fire V210 and V240 Server Compliance and Safety
Guide
Sun Fire V210 and V240 Server Installation Guide
Sun Fire V210 and V240 Server Documentation CD

Installation Overview

Each step in this procedure refers you to the relevant section of the documentation
for more information. Complete each step in the order listed.
1. Verify that you have received all of the components that ship with your server.
See
TABLE 1-3
2. Install the server into a rack or cabinet.
See "Rackmounting the Server" on page 10.
3. Install any optional components shipped with your system.
Note – See the installation procedures for these components in the Sun Fire V210 and
V240 Servers Administration Guide, which is included on the Sun Fire V210 and V240
Servers Documentation CD.
4. Set up a terminal or console for installing your server.
You can either establish a tip connection from another server or use an ASCII
terminal connected to the SERIAL MGT port.
See "Setting Up a Console Connection to the Server" on page 36.
5. Power on and configure the server.
The Solaris operating environment is preinstalled on the server. When you power
on, you will automatically be taken through the Solaris operating environment
configuration procedure.
See "Powering On The Server" on page 42.
6. Set any desired OpenBoot PROM configuration options (optional).
You can control several aspects of system behavior through OpenBoot™ PROM
commands and configuration variables.
6 Sun Fire V210 and V240 Servers Installation Guide • April 2003
Contents of the Sun Fire V210 and V240 Servers Ship Kit
.
Quantity Part Number
1 817-1462-xx
1 816-4825-xx
1 818-0325-xx