Connecting The Mc Bus Cables To The I/O Panel And Atb; Table 5-2 Memory Channel Bus Connections, I/O Panel And Atb - Sun Microsystems StorEdge A7000 Service Manual

5.9 Connecting the MC Bus Cables to the
I/O Panel and ATB
Note – These sections and drawings do not show the cache memory cards in the
Sun StorEdge A7000 subsystems cabled together, for clarity; they are also cabled
together to form the MC bus.
TABLE 5-2
Sun StorEdge A7000 cabinet.
TABLE 5-2
Subsystem/Cache Memory Card Connector
DSP1/J1
DSP1/J2
DSP1/J3
DSP1/J4
DSP2/J1
DSP2/J2
DSP2/J3
DSP2/J4
describes the cable connection from subsystems DSP1 and DSP2 inside the
FIGURE 5-8
MEMORY CHANNEL Bus Connections, I/O Panel and ATB
is a connection block diagram.
Connects To...
Right opening, top I/O panel
Left opening, top I/O panel
Right opening, bottom I/O panel
Left opening, bottom I/O panel
ATB, connector J1
ATB, connector J2
ATB, connector J3
ATB, connector J4
Chapter 5 Installing the RDC FORM Hardware 5-13