Safety Precautions - Sun Microsystems 2.1 Gbyte 7200 rpm Installation Manual

Safety Agency Compliance

Safety Precautions

Symbols
!
x
Before beginning any procedure, read the information in this section. This
information explains how to work safely when installing a Sun product.
French, German, and Spanish translations are in Appendix A.
For your protection, observe the following safety precautions when setting up
your equipment:
•
Follow all warnings and instructions marked on the equipment.
•
Ensure that the voltage and frequency of your power source matches the
voltage and frequency inscribed on the equipment's electrical rating label.
•
Never push objects of any kind through openings in the equipment.
Dangerous voltages may be present. Conductive foreign objects could
produce a short circuit that could cause fire, electric shock, or damage to
your equipment.
The following symbols, which appear in this book, mean:
Caution – Risk of personal injury and equipment damage. Follow the
instructions.
Warning – Hazardous voltages are present. To reduce the risk of electric shock
and danger to personal health, follow the instructions.
On – Applies DC power to the system.
Off – Removes DC power from the system.
Standby – Removes DC power from the system.
2 Gbyte Standard Connector Disk Drive Installation Manual—May 1995