Table of Contents
Advertisement
7. Remove the four screws securing the drive to the mounting plate.
See Figure 2-8. Place the drive on an antistatic surface.
8. Disconnect the flex cable from the disk drive.
See Figure 2-11 on page 2-12 for the flex cable location. The flex cable is
fragile and must be handled carefully.
Figure 2-8
Removing the Drive from the Mounting Plate
Desktop Disk Pack
2
2-9
Advertisement
Table of Contents
Need help?
Do you have a question about the 2.1 Gbyte 7200 rpm and is the answer not in the manual?
Questions and answers