Table of Contents
Advertisement
3
Completing the Drive Installation
3-16
System configuration occurs after a system is successfully powered on. If the
system shutdown was performed according to the procedure in Chapter 1,
your system should automatically configure when you power on the system.
To complete the installation of the 2.1 Gbyte disk drive into your Multi-Disk
Pack:
1. Go to the Handbook for SMCC Peripherals that came with your operating
system.
2. Follow the instructions in the "Configuring the System" section.
2 Gbyte Standard Connector Disk Drive Installation Manual—May 1995
Advertisement
Table of Contents
Need help?
Do you have a question about the 2.1 Gbyte 7200 rpm and is the answer not in the manual?
Questions and answers