Configuring Outside Line Access
The display indicates the OUTSIDE ACCESS? prompt.
Enter the outside line access code (up to 4 digits),
#
or press
if your extension is configured for
direct line access. Press the
If you enter an outside line access code by mistake,
DELETE
press the
the digits.
ADJUSTING THE DISPLAY ANGLE
You can optimize the LCD display by adjusting the viewing angle. To adjust the
LCD viewing angle, move the rear edge of the LCD module up or down.
ADJUSTING THE DISPLAY CONTRAST
The display can be adjusted to suit the light level of your room and your viewing
preference. To make the contrast of the display lighter or darker, press the
button to the right of the screen until the desired contrast is reached.
ADJUSTING THE HANDSET VOLUME
The handset volume can be adjusted
using the toggle switch located on
the right side of the phone. Handset
volume settings are Normal and Loud.
ADJUSTING THE SPEAKERPHONE
RECEIVER VOLUME
The speakerphone receiver volume
can be adjusted using the slide
switch located on the right side of
the phone.
ADJUSTING THE RINGER VOLUME
The ringer volume can be adjusted using the toggle switch
in the back of the phone. Ringer Volume settings are Hi,
Low and Off.
W W W.T A L K S W I T C H . CO M
DIAL/ENTER
button or the
button.
button to delete
T S - 8 0 U S E R G U I D E
_ _ _ _
OUTSIDE ACCESS?
9 _ _ _
OUTSIDE ACCESS?
7