Extension For Dss Line; Sip Configuration, General Parameters; Outbound Proxy Address; Outbound Proxy Port - Talkswitch TS-350i User Manual

Extension for DSS Line

A DSS Line requires entry of the associated extension number. Note do not assign a DSS extension number
for a private or shared line type.
To assign an extension number for a DSS line,
• Press the button, then 2. SIP Configuration, then 1. Line Configuration.
• Enter the line button number or move the cursor using the Down softkey and press the Select softkey
to select a line.
• Select 9. Extension for key.
• Input the extension number for the DSS line using the dial pad and
press the OK softkey to save your entry.
Extension numbers cannot be assigned for a private or shared lines.

SIP Configuration, General Parameters

Parameters in this section are required for the overall SIP operation of the phone.

Outbound Proxy Address

If required, an Outbound Proxy Address can be defined so that the phone sends all SIP requests to the
proxy instead of the SIP server configured in the section SIP Server Address on page 14. The address can be
an IP address or FQDN.
To assign an Outbound Proxy Address
• Press the button, then select 2. SIP Configuration, then 2. Outbound Proxy Addr.
• Input the Outbound Proxy Address using the dial pad and press the
OK softkey to save your entry.
To enter alphanumeric characters select the Mode softkey.
Changing the Outbound Proxy Address requires a reboot of the IP phone.

Outbound Proxy Port

With the Outbound Proxy Server defined, the associated port must be defined as the Outbound Proxy Port.
All SIP requests are sent to the assigned port instead of the proxy port configured in the section Proxy
Port on page 15.
To assign the Outbound Proxy Port:
• Press the button, then select 2. SIP Configuration, then 3. Outbound Proxy Port.
1 8 T S - 3 5 0 i U S E R G U I D E