Waypoint Switching Mode - Furuno MFD12 Operator's Manual

5. Routes
5.10.5

Waypoint Switching Mode

When you reach a route point, your unit automatically changes to the next route point
according to the waypoint switching mode selected on the menu.
Cross Line: Change the waypoint when the vessel moves through an imaginary cross
line (vertical line) that moves through the center of the destination point.
Circle: Change the waypoint when the vessel comes within the circle.
Cross Line & Circle: Change the waypoint when one of the above two conditions is
met.
1. Press the MENU key to open the menu.
2. Open the [Routes-General] menu.
3. Use the RotoKey to select [Waypoint Switching Mode].
4. Use the RotoKey to select an option.
5. Use the RotoKey to select [Switching Mode Circle Radius].
6. Use the RotoKey to enter the distance from a route point at which to change to
next point.
7. Press the MENU key to close the menu.
5-14
Circle Circle and
Cross Line
Cross Line
Cross
Line
Cross Line