Multi Name; Multi Recall - Yamaha SY55 Product Manual

Summary: Assigns a name of up to 10 characters to
the current multi-play setup.
Settings: The following characters are available for
use in multi names:
Summary: Recalls the last multi-play setup edited
from the SY55 edit buffer.
Settings: None
Procedure: After selecting the "MULTI Edit Re-
call" display, press the [ENTER] key. "Sure?"
will appear on the upper line of the display.
Press the [+1/YES] to initialize or [-1/NO] to
cancel the initialize operation.
"Completed!" will appear briefly when the
recall operation is finished.

MULTI NAME

Procedure: Use the
place the underline cursor under the character to
be changed. Use the [DATA ENTRY] control or
[+1/YES] and [-1/NO] keys to select the desired
character. Continue until the entire voice name
has been programmed.
etails: It's a good ideas to give your multi-play
setups names that make them easily identifiable.
If you've created a new multi that is set up for
use with a song titled "The Way Things Are,"
for example, you could call it something like
"TheWay.MUL".
efer to: Tutorial, page 25.

MULTI RECALL

Details: Even if you've exited the multi edit mode
and called a different multi-play setup, this func-
tion will recall the last multi-play setup edited
with all parameters as they were at the time the
multi edit mode was exited.
Please note, however, that a compare opera-
tion overwrites the recall buffer with the con-
tents of the edit buffer at that time. A recall
operation following a compare operation will
therefore recall the contents of the edit buffer at
the time of the compare operation.
Refer to: Tutorial, page 25.
MULTI EDIT MODE
JOB 1 1
and
cursor keys to
JOB 12
113