Wan Dhcp; Figure 78 Menu 24.4 - System Maintenance: Diagnostic - Nortel BCM50a Configuration Manual

158 Chapter 14 System information and diagnosis
Follow the procedure below to get to Menu 24.4 - System Maintenance –
Diagnostic.
1
2
Figure 78 Menu 24.4 – System Maintenance: Diagnostic
Menu 24.4 - System Maintenance - Diagnostic

WAN DHCP

DHCP functionality can be enabled on the LAN or WAN as shown in WAN &
LAN DHCP. LAN DHCP is discussed in BCM50a Integrated Router
Configuration - Basics (N0115790). The BCM50a Integrated Router can act
either as a WAN DHCP client (IP Address Assignment field in menu 4 or menu
11.3 is Dynamic and the Encapsulation field in menu 4 or menu 11 is Ethernet) or
None, (when you have a static IP). Using the WAN Release and Renewal fields in
menu 24.4, you can release or renew the assigned WAN IP address, subnet mask
and default gateway, or do both. This is similar to using the file winipcfg.
N0115791
From the main menu, select option 24 to open Menu 24 - System
Maintenance.
From this menu, select option 4. Diagnostic. This opens Menu 24.4 - System
Maintenance - Diagnostic.
TCP/IP
System
1. Ping Host
2. WAN DHCP Release
3. WAN DHCP Renewal
4. PPPoE/PPPoA Setup Test
11. Reboot System
Enter Menu Selection Number:
Host IP Address= N/A