Verifying Settings; Figure 107 Macintosh Os 8/9: Tcp/Ip - Nortel BCM50a Configuration Manual

202 Appendix A Setting up your computer IP address
2

Figure 107 Macintosh OS 8/9: TCP/IP

3
4
5
6
7

Verifying Settings

Check your TCP/IP properties in the TCP/IP Control Panel window.
N0115791
Select Ethernet built-in from the Connect via list.
For dynamically assigned settings, select Using DHCP Server from the
Configure: list.
For statically assigned settings, do the following:
— From the Configure box, select Manually.
— Type your IP address in the IP Address box.
— Type your subnet mask in the Subnet mask box.
— Type the IP address of your BCM50a Integrated Router in the Router
address box.
Close the TCP/IP Control Panel.
Click Save if prompted, to save changes to your configuration.
Turn on your BCM50a Integrated Router and restart your computer (if
prompted).