Figure 79 Wan & Lan Dhcp; Table 33 System Maintenance Menu Diagnostic - Nortel BCM50a Configuration Manual

Figure 79 WAN & LAN DHCP
Table 33 describes the diagnostic tests available in menu 24.4 for your BCM50a
Integrated Router and associated connections.

Table 33 System Maintenance menu diagnostic

Field
Ping Host
WAN DHCP Release
WAN DHCP Renewal
PPPoE/PPPoA Setup Test
Reboot System
Host IP Address=
Chapter 14 System information and diagnosis 159
BCM50a Integrated Router
Description
Enter 1 to ping any machine (with an IP address) on your
LAN or WAN. Enter its IP address in the Host IP Address
field below.
Enter 2 to release your WAN DHCP settings.
Enter 3 to renew your WAN DHCP settings.
This feature is only available for dial-up connections using
PPPoE or PPPoA encapsulation. Enter 4 to test the
Internet setup. You can also test the Internet setup in
Menu 4 - Internet Access. Refer to
access," on page 65 for more details.
Enter 11 to reboot the BCM50a Integrated Router.
If you entered 1 in Ping Host, enter the IP address of the
computer you want to ping in this field.
Enter the number of the selection you want to perform or
press [ESC] to cancel.
BCM50a Integrated Router Configuration — Advanced
Chapter 5, "Internet