Example Filter - Nortel BCM50a Configuration Manual

130 Chapter 11 Filter configuration
Table 26 Generic Filter Rule Menu fields
Field
Value
More
Log
Action
Matched
Action
Not
Matched

Example Filter

The example shown in
BCM50a Integrated Router via Telnet. See the included disk for more Filter Rules
example.
N0115791
Description
Enter the value (in Hexadecimal notation) to compare with
the data portion.
If Yes, a matching packet is passed to the next filter rule
before an action is taken; or the packet is disposed of
according to the action fields.
If More is Yes, then Action Matched and Action Not Matched
are No.
Select the logging option from the following:
None - No packets are logged.
Action Matched - Only packets that match the rule
parameters are logged.
Action Not Matched - Only packets that do not match the
rule parameters are logged.
Both – All packets are logged.
Select the action for a packet matching the rule.
Select the action for a packet not matching the rule.
After you complete filling in Menu 21.1.1.1 - Generic Filter
Rule, press [ENTER] at the message "Press ENTER to
Confirm" to save your configuration, or press [ESC] to
cancel. This data is now be displayed on Menu 21.1.1 -
Filter Rules Summary.
Figure 60 is set to block outside users from accessing the
Options
Yes
No
None
Action
Matched
Action Not
Matched
Both
Check Next
Rule
Forward
Drop
Check Next
Rule
Forward
Drop