Nortel BCM50a Configuration Manual page 243

Table 56 Sys commands
Command
logs
category
clear
display
errlog
8021x
access [0:none/1:log/
2:alert/3:both]
attack [0:none/1:log/
2:alert/3:both]
cdr [0:none/1:log]
display
error [0:none/1:log/
2:alert/3:both]
icmp [0:none/1:log]
ike [0:none/1:log/2:alert/
3:both]
ipsec [0:none/1:log/
2:alert/3:both]
javablocked [0:none/1:log]
mten [0:none/1:log]
packetfilter [0:none/
1:log]
ppp [0:none/1:log]
remote [0:none/1:log]
tcpreset [0:none/1:log]
upnp [0:none/1:log]
urlblocked [0:none/1:log/
2:alert/3:both]
urlforward [0:none/1:log]
[access|attack|error|ike|i
psec|javablocked|mten|pack
etfilter|pki|
tcpreset|tls|upnp|urlblock
ed|urlforward]
clear
BCM50a Integrated Router Configuration — Advanced
Appendix G Command Interpreter 243
Description
Records logs for IEEE 802.1X.
Records, sends alerts, or both for
access control logs.
Records, sends alerts, or both for
firewall attack logs.
Records Call Detail Record logs.
Displays the category settings.
Records, sends alerts, or both for
system error logs.
Records ICMP logs.
Records, sends alerts or both for
access control logs.
Records the access control logs
Records the java blocked logs.
Records the system maintenance logs.
Records the packet filter logs.
Records the PPP logs.
Records the remote management logs.
Records the TCP reset logs.
Records the UPnP logs.
Records and/or sends alerts for web
access blocked logs.
Records web access forward logs.
Clears the log.
Displays all logs or specifies a category
of logs.
Clears the error log.