Figure 50 Menu 15.3 - Trigger Port Setup; Table 22 Menu 15.3: Trigger Port Setup Description - Nortel BCM50a Configuration Manual

112 Chapter 9 Network Address Translation (NAT)
Figure 50 Menu 15.3 – Trigger Port Setup
Rule Name
----------------------------------------------------------------------
1. Real Audio
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Table 22

Table 22 Menu 15.3: Trigger Port setup description

Field
Rule
Name
Incoming
Start Port
End Port
N0115791
Menu 15.3 - Trigger Port Setup
Incoming
Start Port End Port
6970 7170
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
Press ENTER to Confirm or ESC to Cancel:
describes the fields in
Description
This is the rule index number.
Enter a unique name for identification purposes. You can enter
up to 15 characters in this field. All characters are permitted -
including spaces.
Incoming is a port (or a range of ports) that a server on the WAN uses when
it sends out a particular service. The BCM50a Integrated Router forwards the
traffic with this port (or range of ports) to the client computer on the LAN that
requested the service.
Enter a port number or the starting port number in a range of
port numbers.
Enter a port number or the ending port number in a range of port
numbers.
Trigger
Start Port End Port
7070 7070
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
Figure 50.
Example
1
Real
Audio
6970
7170