Table of Contents
Advertisement
Follow the procedure below to get to Menu 24.4 - System Maintenance –
Diagnostic.
1
From the main menu, select option 24 to open Menu 24 - System
Maintenance.
2
From this menu, select option 4. Diagnostic. This opens Menu 24.4 - System
Maintenance - Diagnostic.
Figure 80 Menu 24.4: System Maintenance: Diagnostic
Menu 24.4 - System Maintenance - Diagnostic
WAN DHCP
DHCP functionality can be enabled on the LAN or WAN as shown in WAN &
LAN DHCP. LAN DHCP is discussed in BCM50e Integrated Router
Configuration - Basics (
as a WAN DHCP client (IP Address Assignment field in menu 4 or menu 11.1.2 is
Dynamic and the Encapsulation field in menu 4 or menu 11 is Ethernet) or None,
(when you have a static IP). Using the WAN Release and Renewal fields in menu
24.4, you can release or renew the assigned WAN IP address, subnet mask and
default gateway, or do both. This is similar to using the file winipcfg.
Chapter 14 System information and diagnosis 157
TCP/IP
1. Ping Host
2. WAN DHCP Release
3. WAN DHCP Renewal
4. PPPoE/PPTP Setup Test
System
11. Reboot System
Enter Menu Selection Number:
Host IP Address= N/A
N0115788
). The Business Secure Router can act either
BCM50e Integrated Router Configuration - Advanced
Advertisement
Table of Contents
