Internet Access; Internet Access Configuration - Nortel BCM50a Configuration Manual

Chapter 5

Internet access

This chapter shows you how to configure your BCM50a Integrated Router for
Internet access.

Internet access configuration

Using Menu 4 you can enter the Internet Access information in one screen. Menu
4 is actually a simplified setup for one of the remote nodes that you can access in
Menu 11. Before you configure your BCM50a Integrated Router for Internet
access, you must collect your Internet account information.
Use your Internet account information from your ISP to fill in this menu. Note
that if you are using PPPoA or PPPoE encapsulation, the only ISP information
you need is a logon name and password. You only need to know the Ethernet
Encapsulation Gateway IP address if you are using ENET ENCAP encapsulation.
From the main menu, type 4 to display Menu 4
shown in the following figure.
BCM50a Integrated Router Configuration — Advanced
Internet Access Setup, as
—
65