Wan Dhcp; Figure 89 Menu 24.4: System Maintenance: Diagnostic - Nortel 222 User Manual

Follow the procedure below to get to Menu 24.4 - System Maintenance –
Diagnostic.
1
From the main menu, select option 24 to open Menu 24 - System
Maintenance.
2
From this menu, select option 4. Diagnostic. This opens Menu 24.4 - System
Maintenance - Diagnostic.

Figure 89 Menu 24.4: System Maintenance: Diagnostic

Menu 24.4 - System Maintenance - Diagnostic

WAN DHCP

DHCP functionality can be enabled on the LAN or WAN as shown in WAN &
LAN DHCP. LAN DHCP is discussed in Nortel Business Secure Router 222
Configuration — Basics (NN47922-500). The Business Secure Router can act
either as a WAN DHCP client (IP Address Assignment field in menu 4 or menu
11.1.2 is Dynamic and the Encapsulation field in menu 4 or menu 11 is Ethernet)
or None, (when you have a static IP). Using the WAN Release and Renewal fields
in menu 24.4, you can release or renew the assigned WAN IP address, subnet
mask and default gateway, or do both. This is similar to using the file winipcfg.
Chapter 14 System information and diagnosis 177
TCP/IP
1. Ping Host
2. WAN DHCP Release
3. WAN DHCP Renewal
4. PPPoE/PPTP Setup Test
System
11. Reboot System
Enter Menu Selection Number:
Host IP Address= N/A
Nortel Business Secure Router 222 Configuration — Advanced