Figure 93 Menu 24.11 - Remote Management Control; Table 40 Menu 24.11 - Remote Management Control - Nortel BCM50a Configuration Manual

186 Chapter 17 Remote Management
Figure 93 Menu 24.11 – Remote Management Control
Table 40
Table 40 Menu 24.11 – Remote Management control
Field
Telnet Server
FTP Server SSH
Server
HTTPS Server
HTTP Server
SNMP Service
DNS Service
Port
Access
Secure Client IP
N0115791
Menu 24.11 - Remote Management Control
TELNET Server:
FTP Server:
SSH Server:
HTTPS Server:
HTTP Server:
SNMP Service:
DNS Service:
Press ENTER to Confirm or ESC to Cancel:
describes the fields in
Description
Each of these read-only labels denotes a service that you can use
to remotely manage the BCM50a Integrated Router.
This field shows the port number for the service or protocol. You
can change the port number if needed, but you must use the same
port number to access the BCM50a Integrated Router.
Select the access interface (if any) by pressing [SPACE BAR], then
[ENTER] to choose from: LAN only, WAN only, ALL or Disable.
The default 0.0.0.0 allows any client to use this service to remotely
manage the BCM50a Integrated Router. Enter an IP address to
restrict access to a client with a matching IP address.
Port = 23 Access = Disable
Secure Client IP = 0.0.0.0
Port = 21 Access = Disable
Secure Client IP = 0.0.0.0
Certificate = auto_generated_self_signed_cert
Port = 22 Access = Disable
Secure Client IP = 0.0.0.0
Certificate = auto_generated_self_signed_cert
Authenticate Client Certificates = No
Port = 443 Access = Disable
Secure Client IP = 0.0.0.0
Port = 80 Access = LAN only
Secure Client IP = 0.0.0.0
Port = 161 Access = Disable
Secure Client IP = 0.0.0.0
Port = 53 Access = LAN only
Secure Client IP = 0.0.0.0
Figure 93.