Loading The 3Com Etherlink Server Cd; Netware 4.11; Netware 5.0; Copying The Driver - 3Com EtherLink 3C985B-SX User Manual

Loading the 3Com EtherLink Server CD

NetWare 4.11

Insert the CD in the CD-ROM drive and enter these
commands:
load cdrom
cd mount 3C985B_SX

NetWare 5.0

Insert the CD in the CD-ROM drive and enter this command:
load cdrom
Wait for the message that states the CD is mounted
successfully, and then proceed to copy the driver.

Copying the Driver

1 Enter this command at the prompt:
NetWare 4.11:
NetWare 5.0:
2 In the Installation Options screen, select Driver options.
3 In the Driver Options screen, select
Configure network drivers.
4 In the Additional Driver Actions screen, select
Select a driver.
The Select a Driver screen appears, listing all previously
saved drivers in the system.
If this is the first installation of the 3Com server NIC driver,
it does not appear in this list.
5 Press Insert.
A system message for selecting a disk drive appears.
6 Press F3.
7 Enter the path to the driver. For example:
3C985B_SX:\netware
The Select a Driver to Install screen appears with the
3C985B-SX server NIC driver name highlighted.
8 Press Enter to select the driver.
Installing and Configuring the Software
load install
load nwconfig
41