Viewing Test Results And Nic Information; Exiting The Program; Uninstalling 3Com Software; Windows Nt Software Removal - 3Com EtherLink 3C985B-SX User Manual

80 C
HAPTER
h Click OK.
i From the Test menu, select Run Tests.
j Click Start.
The test results are updated on the screen as the test runs.

Viewing Test Results and NIC Information

The Test Results screen is updated while the tests run,
showing the number of times each test was run and the
pass/fail results.
Internal test results are reported in the form of NIC
statistics. To view the NIC Statistics screen select
NIC Statistics from the View menu.
To view information about the NIC, from the View menu,
select NIC Information.

Exiting the Program

To exit the DOS diagnostics program, from the Quit menu,
select Exit, or press F3.

Uninstalling 3Com Software

Follow the procedures in this section to remove 3C985B-SX
server NIC drivers and associated software from the server.

Windows NT Software Removal

1 From the Start menu, select Settings/Control Panel.
2 Double-click the Network icon.
3 In the Network window, click the Adapters tab.
4 In the Adapters tab, select 3Com Gigabit Ethernet
Adapter (3C985).
5 Click Remove.
6 Follow the prompts to remove the software and
reboot the server.
5: D
IAGNOSTICS AND
The main screen reappears.
The Test Results screen appears.
T
ROUBLESHOOTING