Saving The Configuration; Other Procedures; Disabling Load Balancing For A Group - 3Com EtherLink 3C985B-SX User Manual

30 C
HAPTER
Saving the Configuration
To save and exit, click OK.
A prompt asks whether you want to configure traffic
prioritization. If you click Yes, DynamicAccess Software
Setup windows appear.
For detailed information on DynamicAccess software,
go to:
http://www.3com.com/dynamicaccess
To exit without saving the configuration, click Cancel.

Other Procedures

Use the following procedures as needed to maintain
the configuration.

Disabling Load Balancing for a Group

1 Click the Load Balance/RSL tab
2 In the Load Balance/RSL window:
a Select a group from the Load Balancing/RSL Groups list.
b Click Properties.
3 In the Group Properties dialog box:
To disable receive load balancing
4 Click OK.
3: I C
NSTALLING AND
To disable receive load balancing only — Clear
I
the Receive Load Balance Enabled check box.
To disable all load balancing — Clear the
I
Receive Load Balance Enabled and the
Transmit Load Balance Enabled check boxes.
W
ONFIGURING THE INDOWS
(Figure
To disable all load balancing
NT D
RIVER
5).