Specifying Traffic Priorities - 3Com EtherLink 3C985B-SX User Manual

Specifying Traffic Priorities
You can use the DynamicAccess Software Setup screen
to specify traffic priorities.
1 Double-click the 3Com DynamicAccess icon in the
Windows Control Panel.
The DynamicAccess Software Setup windows appear.
2 Click the appropriate tab:
I
I
I
Figure 7 DynamicAccess Traffic Prioritization Window
Creating a Load Balancing/RSL and VLAN Configuration
Traffic Prioritization —
to ease bottlenecks in the network and allow critical
applications to take network precedence. You can turn
traffic prioritization on or off independently for:
Each NIC that is not in a group and does not
I
have VLANs
Each group that does not have VLANs
I
Each VLAN
I
Each virtual NIC (NIC, group, or VLAN) shown in
I
the Traffic Prioritization control panel
Fast IP — Enable and configure Fast IP.
Administration — Set DynamicAccess control panel
access, set VLAN options, enable efficient multicast
control, and enable the prioritizing of multicast traffic.
(Figure 7) Prioritize applications
29