Display Status; Help; Link Tmo - 3Com EtherLink 3C985B-SX User Manual

52 C
HAPTER

display status

This command displays information about all
Load Balancing/RSL groups, or if a primary slot parameter
is specified, only about the specified group.
Syntax
Example
Messages

help

This command displays a list of the Load Balancing/RSL
commands.
Syntax

link tmo

When a group is being created, Load Balancing/RSL waits
the number of seconds specified by this command for the
link/topology check to finish.
Syntax
Example
Default
Messages
4: I C
NSTALLING AND
Link integrity check for primary slot
# xxxxx (0xHH) Failed - Setting board
status to Inactive.
Link integrity check for primary slot
# xxxxx Passed.
el980lb display status pri_slot
where:
pri_slot is the PCI slot number of the primary NIC.
el980lb display status 10001
A separate message is displayed for each loaded frame
type. Board numbers are also displayed. Information
about the relationship between the board numbers and
the frame types is shown in the NetWare 5 Console
Monitor; on the Available Options screen, select
LAN/WAN drivers for this information.
el980lb help
el980lb link tmo value_in_seconds
where:
value_in_seconds is any positive integer.
el980lb link tmo 10
5
Displays the timeout information.
N
ONFIGURING THE ET
W D
ARE RIVER