Making An Isdn Call; Making An Audio-Only Call - RADVision SCOPIA XT100 Series User Manual

Making an ISDN Call

Your system administrator must enable the ISDN call feature in your terminal.
Procedure
Step 1
Select the ISDN number from the Recall list or from the phonebook. Or dial the ISDN number in
the Direct call page and select the ISDN Call profile.
Step 2
Press

Making an Audio-only Call

You may also use the SCOPIA XT1000 to place audio-only calls.
Procedure
Step 1
In the Main Menu page, select Make your call. (Or press
Step 2
The Direct call page appears on the display.
Step 3
Select Advanced options.
Step 4
Enter the contact number using the Remote Control Unit or the virtual keyboard. You may also
use the Recent calls list, or insert the name of the contact you wish to call if it exists in your
phonebook.
Step 5
Select Audio in the drop-down list.
Step 6
To call, press
RADVISION | User Guide for SCOPIA XT1000 Series Version 2.0
Figure 2-1
Call to place your call.
or Call on the Remote Control Unit.
Direct Call Dialing
or Direct call.)
'Making Calls' | 16