Pairing A Xt Remote Control Unit With A Xt Codec Unit - RADVision SCOPIA XT4000 Series User Manual

The default input method is abc1: you must press the alphanumeric button repeatedly before
entering a digit. To enter text in the XT Series interface, scroll to the input field and enter
the required characters.
You can also select another input method that best suits the type of information you want to
enter in the input field.
Press
repeatedly to select one of these methods:

Pairing a XT Remote Control Unit with a XT Codec Unit

Multiple XT Codec Units can be set up in the conference room and controlled with different XT
Remote Control Units.
You can dedicate your XT Remote Control Unit to monitor one or more XT Codec Units of your
choice by configuring the same numeric code in your XT Remote Control Unit and the system
software.
An XT Remote Control Unit is configured with code 01 by default.
Before you begin
Decide what numeric code you want to use for your monitor and the XT Codec Unit.
Procedure
Step 1
Step 2
RADVISION | User Guide for SCOPIA XT4000 Series Version 3.0
while the cursor is in the input field. The input methods are displayed. Press
•
Typing digits before typing letters: 1abc for lowcase letters and 1ABC for uppercase
letters.
•
Typing letters before typing digits: abc1 for lowcase letters and ABC1 for uppercase
letters.
•
Typing only digits (123).
Access the SCOPIA XT Series web interface.
In the User settings tab, select User preferences > General > General.
Getting Started | 16