Debug Platform Tcam Info - Cisco ASR 901 Command Reference Manual

debug platform tcam info

debug platform tcam info
To enable TCAM info printing, use the debug platform tcam info command in the privileged EXEC
mode. To disable TCAM info printing, use the no debug platform tcam info command.
Syntax Description
This command has no arguments or keywords.
Command Modes Privileged EXEC (#)
Command History Release
15.3(2)S
Examples
The following is sample output from the debug platform tcam info command:
Router# debug platform tcam info
TCAM Info printing turned ON
Cisco ASR 901 Aggregation Services Router Command Reference Guide
1-34
debug platform tcam info
no debug platform tcam info
Modification
This command was introduced on the Cisco ASR 901 Series Aggregation
Services Routers.
Chapter 1 CLI Command Reference
OL-26031-07