Hardware Features
This section provides an overview of the following hardware features for the Cisco IR1101.
Platform Features for Cisco IR1101 (Base)
The following lists the hardware platform features for the Cisco IR1101.
External Power Entry
—
Nominal: 12 to 48VDC
—
Absolute min/max: 9.6 to 60VDC
—
Typical current: 0.82A to 0.22A
—
Maximum current: 0.91A to 0.28A
—
4-pin 3.8 mm EURO power connector
External Reset/Recovery Push Button
Gigabit Ethernet Combo RJ45+SFP connector.
—
RJ45 connector will support IEEE802.3 Ethernet over copper wiring standards of 10Base-T, 100Base-TX, and
1000Base-T
—
SFP port will support 1000Base-X or 100Base-FX Fiber Ethernet standard SFP (see the supported list of SFP's
here:
SFP Module, page
LAN Ports
—
4x RJ45 10/100 Fast Ethernet
Serial Port
—
1 x RJ45 RS232 Port (DTE)
USB Ports
—
1x USB 2.0 Type A Host Port
—
1x USB 2.0 mini USB Type B console port
Compliance
—
Class A EMC or better
—
IP30 compliant when vertical and ports downward
Industrial temperature [-40ºC to +60ºC, 13.8Kft (operating), 15Kft (non-operating)]
One alarm input
Platform Features for Cisco IR1101 (Pluggable Module)
The IR1101 is designed to accept a Pluggable Module. There is additional documentation for the Pluggable Module in
the Cisco 1000 Series guides that can be found here:
22)
17