Network-Clock Set Lockout - Cisco ASR 901 Command Reference Manual

network-clock set lockout

network-clock set lockout
To lock out a clock source, use the network-clock set lockout command. Use the network-clock clear
lockout form of the command to remove the lockout.
Syntax Description
interface_name
external
Command Modes Global configuration
Command History Release
15.1(2)SNG
Usage Guidelines The network-clock set lockout command locks out a clock source. A clock source flagged as lock-out
is not selected for SyncE.
To clear the lock-out on a source, use network-clock clear lockout {interface interface_name slot/port
| external slot/card/port} command.
Lockout takes precedence over force switch and force switch overrides the manual switch.
Note
Examples
This example shows how to lockout the clock source.
Router(config)#network-clock set lockout interface GigabitEthernet 0/1
Cisco ASR 901 Aggregation Services Router Command Reference Guide
1-82
network-clock set lockout {interface interface_name slot/port | external slot/card/port}
network-clock clear lockout
Specifies the interface name.
specifies the external interface name.
Modification
Support for this command was introduced on the Cisco ASR 901 router.
Chapter 1 CLI Command Reference
OL-26031-07