Cisco ASR 901 Command Reference Manual page 214

table-map
router bgp 100
address-family ipv4 unicast
table-map tag
Related Commands Command
address-family ipv4 (BGP)
address-family vpn4
match as-path
match ip address
match ip next-hop
route-map (IP)
Cisco ASR 901 Aggregation Services Router Command Reference Guide
1-200
Description
Places the router in address family configuration mode for
configuring routing sessions such as BGP, RIP, or static routing
sessions that use standard IP Version 4 address prefixes.
Places the router in address family configuration mode for
configuring routing sessions such as BGP, RIP, or static routing
sessions that use standard VPN Version 4 address prefixes.
Matches a BGP autonomous system path access list.
Distributes any routes that have a destination network number
address that is permitted by a standard or extended access list, and
performs policy routing on packets.
Redistributes any routes that have a next hop router address passed
by one of the access lists specified.
Defines the conditions for redistributing routes from one routing
protocol into another, or enables policy routing.
Chapter 1 CLI Command Reference
OL-26031-07