Cisco ASR 901 Command Reference Manual page 154

set precedence
Command
service-policy
set cos
set dscp
set qos-group
show policy-map
show policy-map
interface
show table-map
table-map (value
mapping)
Cisco ASR 901 Aggregation Services Router Command Reference Guide
1-140
Description
Attaches a policy map to an input interface or VC, or an output interface
or VC, to be used as the service policy for that interface or VC.
Sets the Layer 2 CoS value of an outgoing packet.
Marks a packet by setting the Layer 3 DSCP value in the ToS byte.
Sets a group ID that can be used later to classify packets.
Displays the configuration of all classes for a specified service policy map
or all classes for all existing policy maps.
Displays the configuration for all classes configured for all service
policies on the specified interface or displays the classes for the service
policy for a specific PVC on the interface.
Displays the configuration of a specified table map or all table maps.
Creates and configures a mapping table for mapping and converting one
packet-marking value to another.
Chapter 1 CLI Command Reference
OL-26031-07