Cisco ASR 901 Command Reference Manual page 69

Chapter 1 CLI Command Reference
ip tos
To configure the Type of Service (ToS) level for IP traffic, use the ip tos command in pseudowire class
configuration mode. To disable a configured ToS value, use the no form of this command.
.
value value_number
Syntax Description
Defaults
The default ToS value is 0.
Command Modes Pseudowire class configuration
Command History Release
15.1(2)SNI
Examples
Router(config) # pseudowire-class ether-pw
Router(config-pw)# ip tos value 1
Related Commands Command
pseudowire-class
OL-26031-07
ip tos value value_number
no ip tos value value_number
Specifies the type of service (ToS) level for IP traffic in the pseudowire.
Modification
Support for this command was introduced on the Cisco ASR 901 router.
Description
Specifies the name of a Layer 2 pseudowire-class and enters
pseudowire-class configuration mode.
Cisco ASR 901 Aggregation Services Router Command Reference Guide
ip tos
1-55