Cisco ASR 901 Command Reference Manual page 215

Chapter 1 CLI Command Reference
termination
Configures the DSL interface to function as central office equipment or customer premises equipment.
Use the no form of this command to remove the configuration.
Syntax Description
co
cpe
Defaults The default setting is cpe.
Command Modes
Controller configuration
Command History Release
15.1(2)SNG
Examples
The following example shows how to use the termination command:
Router# configure terminal
Router(config)# controller shdsl2/0
Router(config-controller)# equipment-type co
Related Commands Command
controller
OL-26031-07
termination {co | cpe}
no termination {co | cpe}
The WIC functions as central office equipment and can interface with
another G.SHDSL WIC configured as cpe
The WIC functions as customer premises equipment and can interface with
a DSLAM or with another G.SHDSL WIC configured as co.
Modification
Support for this command was introduced on the Cisco ASR 901 router.
Description
Configures the digital subscriber line (DSL) controller.
Cisco ASR 901 Aggregation Services Router Command Reference Guide
termination
1-201