Cisco ASR 901 Command Reference Manual page 174

show ip vrf
U
Table 1-6
Table 1-6
Field
Name
Default RD
Interface
The following example displays detailed information about all of the VRFs configured on the router,
including all of the VAIs associated with each VRF:
Router# show ip vrf detail
VRF D; default RD 2:0; default VPNID <not set>
Interfaces:
Connected addresses are not in global routing table
Export VPN route-target communities
RT:2:0
Import VPN route-target communities
RT:2:1
No import route-map
No export route-map
VRF U; default RD 2:1; default VPNID <not set>
Interfaces:
Virtual-Access3
Connected addresses are not in global routing table
No Export VPN route-target communities
Import VPN route-target communities
RT:2:1
No import route-map
No export route-map
Table 1-7
Table 1-7
Field
VPNID
Interfaces
Virtual-Accessn [D]
Export
Import
The following example shows the interfaces bound to a particular VRF:
Router# show ip vrf interfaces
InterfaceIP-AddressVRFProtocol
Cisco ASR 901 Aggregation Services Router Command Reference Guide
1-160
Virtual-Access4 [D]
2:1 Virtual-Access3
Virtual-Access4
describes the significant fields shown in the display.
show ip vrf Field Descriptions
Description
Specifies the VRF name.
Specifies the default route distinguisher.
Specifies the network interface.
Loopback2 Virtual-Access3 [D]
Virtual-Access4
describes the significant fields shown in the display.
show ip vrf detail Field Descriptions
Description
Specifies the VPN ID assigned to the VRF.
Specifies the network interfaces.
Specifies the downstream VRF.
Specifies VPN route-target export communities.
Specifies VPN route-target import communities.
Chapter 1 CLI Command Reference
Virtual-Access4 [D]
OL-26031-07