Ptp Profile Telecom - Cisco ASR 901 Command Reference Manual

Chapter 1 CLI Command Reference

ptp profile telecom

To enable the PTP telecom profile on the router, use ptp profile telecom in the clock configuration
mode. To disable PTP telecom profile, use the no form of the command.
Syntax Description
This command has no arguments.
Command Modes Clock configuration
Command History Release
15.1(2)SNI
Usage Guidelines
This command enables the PTP telecom profile on the router.
Examples The following example shows how to configure a PTP clock and enter clock configuration mode:
Router# configure terminal
Router(config)# ptp clock ordinary domain 0
Router(config-ptp-clk)# ptp profile telecom
Related Commands Command
ptp clock
OL-26031-07
ptp profile telecom
no ptp profile telecom
Modification
Support for this command was introduced on the Cisco ASR 901 router.
Description
Creates a PTP clock instance.
Cisco ASR 901 Aggregation Services Router Command Reference Guide
ptp profile telecom
1-107