Cisco ASR 901 Command Reference Manual page 205

Chapter 1 CLI Command Reference
Router# show xconnect all detail
Legend: XC ST=Xconnect State, S1=Segment1 State, S2=Segment2 State
UP=Up, DN=Down, AD=Admin Down, IA=Inactive, NH=No HardwareXC
ST
------+---------------------------------+--+---------------------------------+--
UP
UP
IA pri ac
UP sec ac
The additional fields displayed in the detailed output are self-explanatory.
Related Commands Command
show atm pvc
show atm vc
show atm vp
show connect
show frame-relay pvc
show interfaces
show mpls l2transport
binding
show mpls l2transport vc
OL-26031-07
Segment 1
ac Et0/0(Ethernet)
Interworking: ip
ac Et1/0.1:200(Eth VLAN)
Interworking: ip
Et1/0.2:100(Eth VLAN)
Interworking: none
Et1/0.2:100(Eth VLAN)
Interworking: none
Description
Displays all ATM PVCs and traffic information.
Displays all ATM PVCs and SVCs and traffic information.
Displays the statistics for all VPs on an interface or for a specific VP.
Displays configuration information about drop-and-insert
connections that have been configured on a router.
Displays statistics about PVCs for Frame Relay interfaces.
Displays statistics for all interfaces configured on the router or access
server.
Displays VC label binding information.
Displays information about AToM VCs that have been enabled to
route Layer 2 packets on a router.
Cisco ASR 901 Aggregation Services Router Command Reference Guide
S1 Segment 2
UP mpls 10.55.55.2:1000
Local VC label 16
Remote VC label 16
pw-class: mpls-ip
UP mpls 10.55.55.2:5200
Local VC label 17
Remote VC label 20
pw-class: mpls-ip
UP ac Et2/0.2:100(Eth VLAN)
Interworking: none
UP mpls 10.55.55.3:1101
Local VC label 23
Remote VC label 17
pw-class: mpls
show xconnect
S2
UP
UP
UP
UP
1-191