Network-Clock Switch Force - Cisco ASR 901 Command Reference Manual

Chapter 1 CLI Command Reference

network-clock switch force

To forcefully select a synchronization source irrespective of whether the source is available and is within
the range, use the network-clock switch force command. Use the network-clock clear switch
command to remove the forced switch command.
Syntax Description interface_name
slot/card/port
Command Modes
Global configuration.
Command History Release
15.1(2)SNG
Examples
This example forcefully selects the synchronization source:
Router(config)#network-clock switch force interface GigabitEthernet 0/1 t1
OL-26031-07
network-clock switch force {interface interface_name slot/port | external slot/card/port}
Specifies the interface name.
Specifies the external slot/card/port name.
Modification
Support for this command was introduced on the Cisco ASR 901 router.
Cisco ASR 901 Aggregation Services Router Command Reference Guide
network-clock switch force
1-83