Multiple Spanning Tree Protocol (Mstp) Commands - D-Link xStack DGS-3400 Series Cli Reference Manual

xStack
M
ULTIPLE
The Multiple Spanning Tree Protocol (MSTP) commands in the Command Line Interface (CLI) are listed (along with the
appropriate parameters) in the following table.
Command
show stp
show stp instance
show stp ports
show stp mst_config_id
create stp instance_id
delete stp instance_id
config stp instance_id
config stp mst_config_id
enable stp
disable stp
config stp version
config stp priority
config stp
config stp ports
config stp mst_ports
Each command is listed, in detail, in the following sections.
show stp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show stp:
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
S
PANNING
Parameters
<value 0-15>
{<portlist>} {instance_id <0-15>}
<value 1-15>
<value 1-15>
<value 1-15> [add_vlan | remove_vlan] <vidlist>
{name <string> | revision_level <int 0-65535>
[mstp | rstp | stp]
<value 0-61440> instance_id <value 0-15>
{maxage <value 6-40> | maxhops <value 1-40> | hellotime <value 1-10> |
forwarddelay <value 4-30> | txholdcount <value 1-10> | fbpdu
[enable(3)|disable(2)] | lbd [enable(1)|disable(0)] | lbd_recover_timer [<value 0> |
<value 60-1000000>] | nni_bpdu_addr [dot1d | dot1ad]}(1)
<portlist> {externalCost [auto | <value 1-200000000>] | hellotime <value 1-10> |
migrate [yes | no] | edge [true | false | auto] | p2p [true | false | auto] | state
[enable | disable] | restricted_role [true |f alse] | restricted_tcn [true | false] | lbd
[enable | disable] | fbpdu [enable | disable]}(1)
<portlist> instance_id <value 0-15> {internalCost [ auto | <value 1-200000000>] |
priority <value 0-240>}
Used to show the bridge parameters global settings. (CIST or msti id=0)
show stp
The show stp command is used to show the bridge parameters global settings.
None.
None.
T P
REE ROTOCOL
372
51
(MSTP) C
OMMANDS