D-Link xStack DGS-3400 Series Cli Reference Manual page 268

xStack
DGS-3450:admin# delete address_binding ip_mac ipv6address fe80::240:5ff:fe00:28
mac_address 00-00-00-00-00-11
Command: delete address_binding ip_mac ipv6address fe80::240:5ff:fe00:28 mac_address 00-
00-00-00-00-11
Success.
DGS-3450:admin#
To delete a blocked address:
DGS-3450:admin# delete address_binding blocked vlan_name v31 mac_address 00-00-00-00-00-
11
Command: delete address_binding blocked vlan_name v31 mac_address 00-00-00-00-00-11
Success.
DGS-3450:admin#
config address_binding ip_mac
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure an IMPB entry:
DGS-3450:admin#config address_binding ip_mac ipaddress 10.1.1.1 mac_address 00-00-00-00-
00-11
Command: config address_binding ip_mac ipaddress 10.1.1.1 mac_address 00-00-00-00-00-11
Success.
DGS-3450:admin#
config address_binding ip_mac
Purpose
Syntax
Description
Parameters
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
Used to update an IMPB entry.
config address_binding ip_mac ipaddress <ipaddr> mac_address < macaddr > {ports [
portlist | all]
This command is used to update an IMPB entry.
ipaddr - Specify the IP address of the entry being updated.
macaddr - Specify the MAC address of the entry being updated.
ports - Specify which ports are used for the IMPB entry being updated. If not specified, then it
is applied to all ports.
Only Administrator and Operator-level users can issue this command.
Used to update an IMPB entry.
config address_binding ip_mac [ipaddress < ipaddr > | ipv6address <ipv6addr>]
mac_address < macaddr > {ports [ portlist | all]}
This command is used to update an IMPB entry.
ipaddr - Specify the IP address of the entry being updated.
ipv6addr - Specify the IPv6 address of the entry being updated.
macaddr - Specify the MAC address of the entry being updated
ports - Specify which ports are used for the IMPB entry being updated. If not specified, then it
264