D-Link xStack DGS-3400 Series Cli Reference Manual page 502

xStack
disable sntp
Purpose
Syntax
Description
Parameters
Restrictions
Example:
To disable SNTP support:
DGS-3450:admin# disable sntp
Command: disable sntp
Success.
DGS-3450:admin#
config time
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To manually set system time and date settings:
DGS-3450:admin# config time 30jun2003 16:30:30
Command: config time 30jun2003 16:30:30
Success.
DGS-3450:admin#
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
To disable SNTP server support.
disable sntp
This will disable SNTP support. SNTP service must be separately configured (see config
sntp).
None.
Only Administrator and Operator-level users can issue this command.
Used to manually configure system time and date settings.
config time <date ddmthyyyy> <time hh:mm:ss>
This will configure the system time and date settings. These will be overridden if SNTP is
configured and enabled.
date – Express the date using two numerical characters for the day of the month, three
alphabetical characters for the name of the month, and four numerical characters for the
year. For example: 03aug2003.
time – Express the system time using the format hh:mm:ss, that is, two numerical characters
each for the hour using a 24-hour clock, the minute and second. For example: 19:42:30.
Only Administrator and Operator-level users can issue this command. Manually configured
system time and date settings are overridden if SNTP support is enabled.
498