D-Link xStack DGS-3400 Series Cli Reference Manual page 283

xStack
DGS-3450:admin# show ipmc_vlan_replication
Command: show ipmc_vlan_replication
IP Multicast VLAN Replication State : Enabled
TTL
Source MAC Address
DGS-3450:admin#
show ipmc_vlan_replication_entry
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
This example displays the IP multicast VLAN replication entry named mr1:
DGS-3450:admin# show ipmc_vlan_replication_entry mr1
Command: show ipmc_vlan_replication_entry mr1
IP Multicast VLAN Replication Name
---------------------------------------------
Source
VLAN ID/Name : 1/default
Multicast Group Address
225.1.1.1-225.1.1.10
225.1.1.1-225.1.1.10
Destination
VLAN ID/Name : 2/ VLAN2
Portlist
DGS-3450:admin#
This example displays the IP multicast VLAN replication groups' in the hardware:
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
Used to display the IP multicast VLAN replication entries.
show ipmc_vlan_replication_entry {<name 16> | hardware}
This command is used to display the IP multicast VLAN replication entry. The
"active/inactive" status indicates whether the entry is inserted into chip successfully.
name - The name of the IP multicast VLAN replication entry to be deleted.
hardware - Show the (S,G) groups which are in the chipset.
None.
List (G/S)
/
/
: 1:1-1:11,1:13
: No Decrease
: No Replace
: mr1
*
10.0.0.1
279